Connect with us

playstation 2 power eject ribbon

Discussion in 'Electronic Repair' started by Mwahahahahaaahaa, Jul 2, 2007.

Scroll to continue with content
  1. Hello all.. in an attempt to fix my ps2 DRE the end of the power
    eject ribbon that connects to the motherboard (not the buttons)
    unattached. I have NO idea where it is supposed to go! I've searched
    everywhere, and googled a million keywords and couldn't find where. I
    have an oldschool big model ps2 (it is a version 4). Hopefully someone
    on here can help me out!
  2. Swiss Tony

    Swiss Tony Guest

    Read down to instruction 7
    The picture below shows the ribbon coming in from the right and side near
    the top.
    I hope this helps.
  3. Read down to instruction 7
    That looks promising.. I'll give it a shot tonight. Thanks for the
  4. David B.

    David B. Guest

    I just did one tonight . While I was working on cd tray i happened to pull
    the ribbon out. Remove 4 large screws around cd mechanism,2 small screws on
    slide mech,2 large brass screws front left. Now you can lift cd mech up
    ..Ribbon connects right side about 3 inches from the front.

    heres a good site for more info

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day