Connect with us

Plasma monitor

Discussion in 'Electronic Repair' started by Nick Williams, Nov 22, 2007.

Scroll to continue with content
  1. Can anyone help please?
    On an Orion Electric 'Vision PM4204' I have the top half of the screen with
    a perfect picture, but the bottom half changes intermittently from total
    black to perfect picture. Which area should I concentrate on.
    Any ideas gratefully received

    Regards
    Nick
     
  2. Smitty Two

    Smitty Two Guest

    I think you should concentrate on the bottom half.
     
  3. Dave

    Dave Guest

    I would concentrate on committing the following lesson to memory: don't buy
    no-name junk. After that I would concentrate on digging out my receipt to
    see if the set is still under warranty. After that I would concentrate on
    buying a new set with a reputable brand name.
     
  4. TFN
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-