Maker Pro
Maker Pro

Pionero VSX 1021 K Home Theater Receiver Volume Problem .

Rechevarr

Dec 4, 2015
1
Joined
Dec 4, 2015
Messages
1
Hello everyone I'm having problems with the volume control on my receiver. I have to constantly bring up the volume because it go's down by itself. If i'm not there to bring up the volume it would go down completly. If anyone knows the solution, please post. Thank You .
 

Alec_t

Jul 7, 2015
3,590
Joined
Jul 7, 2015
Messages
3,590
Welcome to EP!
A defective capacitor could be the cause, but without a schematic of the receiver it'll be tricky to track down.
Can you post a well-focussed close-up of the circuit board, especially the area near the volume control (clear enough that component numbering/marking can be read)?
Do any of the capacitors show signs of bulging or leaking?
 

cjdelphi

Oct 26, 2011
1,166
Joined
Oct 26, 2011
Messages
1,166
The fact you have to turn it backup is intriguing ... do you get full volume when turning it up? Or is it quieter than before?

Maybe there's something causing it to trigger volume down, photos of the volume control with pcb? Check for any dirt and crap built up around the volume knob to where it sits on the pcb....
 
Top