Connect with us

PIONEER VSX-808 RDS Receiver

Discussion in 'Electronic Repair' started by [email protected], Jan 18, 2007.

Scroll to continue with content
  1. Guest

    5 years ago I bought a Pioneer VSX-808 RDS Receiver. Recently the
    volume button couldn't be adjusted anymore and more recently when I
    turned the receiver on it shut down itself all the time and on the
    display it's reading "POWER OFF".

    I'm a technician myself and to fix the problems I'm now looking for the
    service manual (not the owner's manual) with the technical schemes of
    the receiver. Can someone help me please??


    Pascal
     
  2. Sofie

    Sofie Guest

    Pascal:
    The obvious first step would be to check the PS and the Audio PO components
    for shorts and faulty components.
    Daniel Sofie
    Electronics Supply & Repair
    - - - - - - - - -
     
  3. Usually a bad output IC - I believe yours used them. Fairly expensive from
    Pioneer, and there are usually no subs, at least no cheaper ones. They got
    wise and quit printing the STK number as part of the lot number on the backs
    of the chips. Try to measure a DC offset at any one channel. That would
    point you to the bad chip. You can measure at the white emitter resistor in
    front of each one. There's probably 5 or 6 resistors total.

    Mark Z.
     
  4. Mr Manuals

    Mr Manuals Guest


    http://www.justmanuals.com/product_info.php?products_id=11434 $9.99
    and instant download

    Paul
    Want to Fix Something?

    http://www.manuals4you.com

    http://www.justmanuals.com
    Instant download after purchase
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-