Connect with us

Pioneer amplifier SX-209RDS

Discussion in 'Troubleshooting and Repair' started by Hedenvall, Aug 10, 2009.

Scroll to continue with content
  1. Hedenvall

    Hedenvall

    3
    0
    Aug 10, 2009
    Hi all!

    my pioneer amp. says overload in the display. i shift the fuse......but it still says overloade....any buddy can hepl pleas?

    /Niclas
     
  2. mzypt

    mzypt

    1
    0
    Aug 25, 2009
    Overload on terminals? If you unplug speaker cables, does it still say "overload"
     
  3. Pdenny

    Pdenny

    8
    0
    Sep 13, 2009
    get access to bottom of main pcb and look for broken and loose solder connections at and around power output modules.look for dc voltage at the output of the moduals,if there is you will need to replace the output modual. if there is no dc voltage present, you will need to trobleshoot the protection circuitry,you will need a schematic.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-