Connect with us

pinouts for summasketch III digitizer

Discussion in 'Electronic Basics' started by none, Aug 19, 2003.

Scroll to continue with content
  1. none

    none Guest

    I recent picked up 4 summasketch III digitizers without interface or
    power cables. I pretty sure I can get a power supply. What I need is
    the pinout of the RJ-45 connector on the back of the digitizer and how
    the power supply and serial/data/interface cable connects to that. Any
    help the can be provided is greatly appreciated.

    Thank you
     
  2. William Lenz

    William Lenz Guest

    My contact for my summasketch III is:

    Sonel Popel 800-344-4723, ext.208


    price the items (contact above) they may be cheep enough to not go though
    the trouble of making something. If it is to much buy just one then copy
    that.
    The contact info is about a month old so it should be still good.
    You can also go to the CalComp web site they may have some info there.

    bill
     
  3. none

    none Guest

    Thanks for the info. Right now unfortunately I am unemployed and
    trying to get this running for some work I'm tryig to get out. I'll
    keep searching. I have enough parts lying around that I coule build a
    couple so may I could sell a couple of the others. If you find out
    anything else please let me know.

    Derick
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-