Maker Pro
Maker Pro

PID Loop basics info???

J

John Popelish

Jan 1, 1970
0
Where will i get info on PID loop. Where will i get simple solved
example on PID loop? How to implement it? how to tune it?
A long time ago, I wrote a basic PID tuning tutorial intended for
industrial operators, but it give the general idea of what a PID
controller does and what tuning might consist of. You can find this at:
http://www.tcnj.edu/~rgraham/PID/popelish.html


For a historical perspective, the original Ziegler and Nichols paper
on PID control tuning based on a different method (ultimate period) is
available at:
http://www.driedger.ca/Z-N/Z-N.html

Just adding the key word "tutorial" to any PID subject search, on
Google, will greatly increase the percentage of useful hits.

For lots of pointers and good advice on this topic, I suggest you ask
again at sci.engr.control.
 
Top