Connect with us

PICMG spec for PCI-ISA card edge connector for SBC

Discussion in 'Electronic Design' started by John Pham, Aug 21, 2003.

Scroll to continue with content
  1. John Pham

    John Pham Guest

    I'm looking for the old PICMG spec for PCI-ISA card edge connector.
    I just need the pinout and mechanical measurement spec. Dont want the other
    and dont want to pay $95 since it is for my own personal project not for
  2. John Pham

    John Pham Guest

    I forget to mention I just need the PICMG 1.0 Rev 2.0 doc
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day