Maker Pro
Maker Pro

Pick And Place Machine (Siemens) Connection Error

kim8268

Aug 10, 2018
1
Joined
Aug 10, 2018
Messages
1
Having problems with both s25hm and f5hm model (siemens machine)
PSTSI - Line control GUI
Error on station "f5hm". Cause connection to the station is not available
Error on station "S25hm". Cause connection to the station is not available
Im a bit of a novice at siemens machine and I only tried checking if the IP address are the same, lan cable and routers but to no benefiting results
Note. IP on the machine and the IP of the machine in the PSTSI - Line control GUI are the same
can any one guide on possible remedy to my problem?
 
Top