Connect with us

Picaxe help

Discussion in 'Electronic Design' started by [email protected], Jun 20, 2005.

Scroll to continue with content
  1. Guest

    Hi im new to picaxe can enyone help me, I need to program a picaxe
    (preferred picaxe 08):
    I have a Thermistor put somewhere inside a computer, and I have a fan
    that I need to turn on or off.
    When the thermistor get up to 40C then, that the fan speeds up, and
    then if it get even hotter say 50C that a light starts blinking (LED).

    Thanks Adriel
     
  2. On 20 Jun 2005 01:21:32 -0700, in sci.electronics.design
    tried google?
    one of the first hits was
    http://www.technologystudent.com/pics/picax6.htm


    martin
     
  3. Ken Moffett

    Ken Moffett Guest

    wrote in @g14g2000cwa.googlegroups.com:
    Have you tried the PICAXE Forum at: http://www.rev-ed.co.uk/picaxe/forum/
    ???
     
  4. Ken Moffett

    Ken Moffett Guest

    wrote in @g14g2000cwa.googlegroups.com:
    Also: http://groups.yahoo.com/group/picaxe/
    ???
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-