Maker Pro
Maker Pro

PIC16F887

timBKK

Apr 3, 2014
2
Joined
Apr 3, 2014
Messages
2
hey guys,
i have this....

pic_zpsa1256ee2.jpg


what i like to know is. is it possible that i can save all entered numbers from the pin pad on the PIC or do i need an other module for this?

and

can i connect an USB port to the PIC to read the data?

any answer would be highly appreciated
thanx
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
1. You can save as many numbers as you can fit in memory. For more you would need external memory of some kind, for example and SD card.

2. The pic16f887 does not support USB. You could use a serial to USB adaptor.

Bob
 

timBKK

Apr 3, 2014
2
Joined
Apr 3, 2014
Messages
2
alright, good idea with the adapter
thank u bob.
i also found the datasheet for the pic. it helps a lot :D
 
Top