Connect with us

PIC16F628 Single Chip Stamp 1 Compatible

Discussion in 'Electronic Basics' started by JimH, May 7, 2005.

Scroll to continue with content
  1. JimH

    JimH Guest

    Hi,
    Was wondering if anyone's interested. Internal resonator in 90% of
    them is accurate enough to program and run serial data perfectly. I've
    also remapped RA so you have 6 additional inputs mapped as testable
    bits BIT8,BIT9,BIT10,BIT13,BIT14,BIT15. So now you have a total of 14
    I/O lines. You can fully decode an 8870 or any other 4 bit source and
    still have 8 for control. You have 128 bytes for tokens and once
    programmed all that is need is 1 pull-up. Was thinking of Ebaying
    these for 9.99 programmed. These are just the thing for adding some
    smarts to your project with simple stamp basic code.

    Jim
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-