Connect with us

Pic programming

Discussion in 'Beginner Electronics' started by FRKJ, Jan 23, 2005.

Scroll to continue with content
  1. FRKJ

    FRKJ Guest

    I have built the David Tait Pic programmer and have used it for a long time.
    Suddenly I can't get it to work properly. It seems unstable and will only
    program the first adresses the rest are filled with 3FFF. I have rebuilt the
    circuit I have tried different computers I think I have tried almost
    everything, it doesn't work!

    Any ideas?

    Flemming
     
  2. loedown

    loedown Guest

    tried a different cable?

    is the PIC device still good, has it failed after multiple writes?

    ZIF socket worn out, one pin gone bad

    Paul
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-