Connect with us

PIC Programmer

Discussion in 'Electronic Basics' started by Heyme, Jan 1, 2005.

  1. Heyme

    Heyme Guest

    I'm looking for a simple PIC programmer for a 16F628. I've seen lots for
    the 16F84, but very few for this chip. the new Pony Prog seems to support
    it, but now i need for find a simple schematic for it. I've used the 509's
    in the past, and liked the simple resistor programmers.

    Any suggestions?
     
  2. seware

    seware Guest

    Try the Olimex PG2C. I use this one. Reliable and cheap. You can pick one up
    cheap at this Ebay store.
    http://stores.ebay.com/PHAnderson-Electronics_W0QQsspagenameZl2QQtZkm

    Steve
     
  3. Hi,

    Have a shufti at this site -

    http://www.oshonsoft.com/

    There you will find some FREE programming software for the '628 (among
    others) and a schematic for a basic parallel port programmer that looks as
    though it would take all of a couple of hours to build. Haven't tried it
    myself as I use a commercial unit but, judging by his excellent $19 IDE, it
    should be fine.

    I have no connection with Vladimir apart from being a satisfied customer
    of his.


    Cheers - Joe
     
  4. Byron A Jeff

    Byron A Jeff Guest

    -I'm looking for a simple PIC programmer for a 16F628. I've seen lots for
    -the 16F84, but very few for this chip. the new Pony Prog seems to support
    -it, but now i need for find a simple schematic for it. I've used the 509's
    -in the past, and liked the simple resistor programmers.
    -
    -Any suggestions?

    Take a look at my Trivial PIC Programmers:

    http://www.finitesite.com/d3jsys

    Try it out with ICProg or if you have problems hit me up for the latest copy
    of picprog.

    BAJ
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-