Connect with us

PIC Programmer????

Discussion in 'Electronic Design' started by Darrin, Jul 6, 2004.

Scroll to continue with content
  1. Darrin

    Darrin Guest

    I have a "ChipMax" Device Programmer (Parallel Port Interface) and would
    like to program a PIC16F84. MPLAB does not support this device. Any ideas as
    to how I can use ChipMax to program the PIC??? Tks/ Darrin
  2. Tim Wescott

    Tim Wescott Guest

    Does MPLAB produce a hex file? If it does it's probably in the right
    format for the programmer's own software to use.
  3. Yes, the Microchip assembler (and the linker) produce Intel hex files.
    Yes, it won't be integrated with the IDE, but his programmer should be
    able to use the hex file.

    Note to OP: Dump the 16F84 and use the 16F628.

    Best regards,
    Spehro Pefhany
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day