Connect with us

Phonic 740 200w Amp

Discussion in 'Electronic Repair' started by Bob, Jul 26, 2004.

Scroll to continue with content
  1. Bob

    Bob Guest

    Hi all,

    As I've been unable to source a diagram for this model I've made an
    attempt at drawing it out myself. I thought I was quite 'au fait' with
    amp design but this one is something I haven't seen before.
    The outputs are 2SC5200 and 2SA1943 but there are also RFP50NO6 fet's
    which appear to be fed from another power line from the main semis and
    connect to their collectors. The o/p trannies are fed to their power
    rails by diodes.
    I've had a burn up of one channel and before I start replacing
    everything I want to make sure I understand how it functions.
    Are there any schematics out on the web with this type of design as that
    would save me a lot of time tracing the board.

    Cheers
    Bob
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-