Connect with us

Phillips LCD TV 30PF9946D/37

Discussion in 'Electronic Repair' started by [email protected], Nov 27, 2006.

Scroll to continue with content
  1. Guest

    Hi all
    I am having the dreaded no picture problem with my Phillips LCD Tv
    (Model # 30PF9946D/37). It is out of warranty and I am not having much
    luck getting through to any service place today. I have read up on
    this and seen the youtube video (Phillips black screen of death) but my
    problem is a little different in that once my tv stopped showing a
    picture it has not shown one since, I only hear sound. I have read
    that this could either be a problem with the inverter or the small
    circuit board (in which case big $$$?). I understand this a short
    coming of these units but I am trying to figure out if it is worth a
    service call or if I should buy a new tv... ugh

    Any insight would be greatly appreciated.
     
  2. b

    b Guest

    if it doesnt work out, you can at least save cash by buying up a decent
    spec used CRT set sold off cheap as people 'upgrade' (sic) to LCD or
    plasma- these times are good for those of us who care about picture
    quality as opposed to 'wall-hangability' ! ;-) plenty of bargains to
    be had....

    -B.
     
  3. vvsvsvfvdffv

    vvsvsvfvdffv

    1
    0
    Aug 21, 2007
    I am having the exact same problem. If anyone has any information it would be greatly appreciated.
     
  4. star_empires

    star_empires

    1
    0
    Jan 25, 2010
    Hi all,

    I have Philips Plazma TV model 30pf9946d/37 in Pakistan and found no any place to repair it. I have some trubble in display and sound. picture is colorless and no voice. picture is roling virticly. can any 1 here in pakistan can help me or suggest repair. i even dont know about its system is it pal, NTSC or secam etc... waiting for nice reply
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-