Philips PM3585 discs

[little.tesla]

Hello,

Is there somebody who can mail me images of the utility and system diskette for a Philips Logic analyzer PM3585.
If a scanned manual or service manual is available, I will be gratefull.

Regards, DI

 

[BigMac]

DI,

Did you ever get the disks and user manual for the Philips PM3585? I have the disks but need the manual. I'd be happy to send you copies of the disks I have (ver 1.1). I know there are new releases out there but I cannot find them.

If you did I would really appreciate getting a copy of the manual and if you have newer disks I'd appreciate those too.

Thanks for any help you, or anyone can provide.

Mike

 

[srickards]

DI,

Did you ever get the disks and user manual for the Philips PM3585? I have the disks but need the manual. I'd be happy to send you copies of the disks I have (ver 1.1). I know there are new releases out there but I cannot find them.

If you did I would really appreciate getting a copy of the manual and if you have newer disks I'd appreciate those too.

Thanks for any help you, or anyone can provide.

Mike

Mike,

Is it possible for me to get those images for the disc from you? Thanks

Steve

 

[toddarc]

DI,

Did you ever get the disks and user manual for the Philips PM3585? I have the disks but need the manual. I'd be happy to send you copies of the disks I have (ver 1.1). I know there are new releases out there but I cannot find them.

If you did I would really appreciate getting a copy of the manual and if you have newer disks I'd appreciate those too.

Thanks for any help you, or anyone can provide.

Mike

I am looking for a system disk as well for my PM3585. I have the following if anyone is in need:

V1.03 Utility disk
V1.01 6809/E settings
V1.01 68000/10 disassembler
V1.02 6800/2/8 Disassembler
V1.01 6800/2/8 Disassembler
V1.02 6809 Disassembler
V1.03 Graphics Workshop

I also have an original manual I would be happy to scan in exchange for disk images.

Thanks!

 

[choplifter]

I have the version 2.1 systems disk, mouse disk and utilities disk and scans of the manual. I tried to include a copy in this post and i will send them to anybody who asks. I am looking for the GPIB 488 disk. Does anybody have that?

 

[choplifter]

I have the version 2.1 systems disk, mouse disk and utilities disk and scans of the manual. I tried to include a copy in this post and i will send them to anybody who asks. I am looking for the GPIB 488 disk. Does anybody have that?

I found out here:
https://www.eevblog.com/forum/testgear/philips-pm3585-add-gpib-option/
That you can install 3 IC;s SN75160, SN75161 and a TMS9914 to get the GPIB option. No software is required. I tried it and it worked really well. Does anybody know if there are Labview drivers or other software to support this feature?

 

[smed]

Hi,
check out the PM 3580/PM3585 SCPI Programming Manual for GPIB programming examples.

regards
smed

 

[smed]

I'd be really grateful for the Disassembler disks !

 

[choplifter]

Hi,
check out the PM 3580/PM3585 SCPI Programming Manual for GPIB programming examples.

regards
smed

Do you know where i can find PDF copies of the manual?

 

[choplifter]

Hi,
check out the PM 3580/PM3585 SCPI Programming Manual for GPIB programming examples.

regards
smed

I purchased a programming manual from ebay, scanned it in and uploaded it here:
http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Philips/PM358X
All the the other manuals and the discs are on the above link.
I also uploaded it here, but it it has not been put up yet:
http://bama.edebris.com/manuals/philips/

 

[bernd]

I am looking for a system disk as well for my PM3585. I have the following if anyone is in need:

V1.03 Utility disk
V1.01 6809/E settings
V1.01 68000/10 disassembler
V1.02 6800/2/8 Disassembler
V1.01 6800/2/8 Disassembler
V1.02 6809 Disassembler
V1.03 Graphics Workshop

I also have an original manual I would be happy to scan in exchange for disk images.

Thanks!

Hello,

do you still offer the contents of the disks above? I've just purchased a PM3585 and I'm looking for everything making it useful. I'd be interested and I would like to offer the contents of the disks that came with mine (8085/8086/8088 - not tested yet).
In addition to the disassemblers you're offering above I'm looking especially for 6502/Z80/68000 disassemblers.
Thank you.

 

[Uppic]

Hola a todos, les agradecería que me enviaran los discos, me dieron uno que estaba en un trastero sin nada, sin cables, sin discos.

muchas gracias

Hi everyone, I would appreciate it if you could send me the discs, they gave me one that was in a storage room with nothing, no cables, no discs.

thank you so much

 

[choplifter]

Hi All
For some odd reason, the files i scanned in were not posted to BAMA. Here is a link with all the manuals and discs (including some dissassemblers):

Service manual, eprom result list | Elektrotanya

Find service and user manuals | Elektrotanya | 2022/12/23

elektrotanya.com

 

[Uppic]

thank you so much