Connect with us

Philips PM3262 failure help needed

Discussion in 'Misc Electronics' started by Al, Apr 8, 2007.

Scroll to continue with content
  1. Al

    Al Guest

    I picked up a Philips PM3262 Oscope at my town's recycling center. it
    looks like it has been well used.

    I plugged it in and turned it on. It worked normally for about 2 minutes
    and then shut down. The ckt breaker on it did not pop. The "ON" light
    was off. After I let it sit for a while, this repeated.

    I don't have schematics and when I took the covers off I did not see
    anything obviously out of kilter.

    Has anyone had this problem and fixed it easily? If so, could you post
    the fix?

    Thanks in advance.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day