Connect with us

Philips 6000 hr lamp

Discussion in 'Electronic Repair' started by Chris, Jul 14, 2004.

Scroll to continue with content
  1. Chris

    Chris Guest

    I have a Philips projector in for repair. The lamp cuts out after about 5
    mins. I've troubleshot it to the lamp supply or lamp. There's no doubt
    about it. There's about 1800 hrs on the projector and lamp. This lamp is
    supposed to have a 6000 hr life. Does anybody know how reliable this claim
    is? Most lamps I see have 1000 - 1500 hr life, not 6000. Also, I don't see
    anything special about the lamp or supply.
  2. Tim Mitchell

    Tim Mitchell Guest

    Yes, there are lamps with 6000 hr life, but if they are badly treated
    (switched on and off quickly, not shut down properly) the life can be
    reduced. However the normal symptom is that they don't strike or take a
    long time to strike. Turning off after a time is normally a heat
    problem, are all the fans running properly?
  3. We're seeing lots of bad lamps after as little as a couple months' ordinary

    Mark Z.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day