Connect with us

Philips 41JP20 flyback

Discussion in 'Electronic Repair' started by James Sweet, May 23, 2004.

Scroll to continue with content
  1. James Sweet

    James Sweet Guest

    I posted this a while ago then forgot to save the reply I got and lost it.
    Anyway can someone get me the number off the flyback? I can see where the
    sticker was on mine but it's not there anymore, can't source a flyback for
    it without knowing the number. Thanks
  2. Bill Jr

    Bill Jr Guest

    Here is a repost of the part numbers I posted awhile back.
    Doesn't have the boards referenced, but I'm not at work to find that
    When I do I will post back.

    Below is a snippet from a post made 4/24/2002 by me:
    For everyone's info....the flybacks listed below are for the most common NAP
    Projo sets as listed at MCM at that time. Pricing may vary accordingly.
    These are used in the APW009 thru APW028 and maybe a few more.

    NAP p/n MCM p/n HR Diemen p/n MCM pricing
    362135-1 33-3714 HR6480 $25.96
    362135-2 33-3716 HR6481 $25.96
    362140-1 33-4286 HR6493 $26.78
    362140-2 33-4288 HR6494 $26.65

    The following are used to replace the big white square block type flyback
    used in some alternate version APW009/010 and possibly APW007/008 boards.

    NAP p/n MCM p/n HR Diemen p/n MCM pricing
    362003-6 33-4296 HR6541 $34.81
    362003-7 33-4298 HR6542 $34.81

    Hope this might help.

    Bill Jr
  3. James Sweet

    James Sweet Guest

    Ok sounds good, when you post further information so I can confirm which
    part it is I need I'll order it. There's a rectangle of adhesive on the
    toasted flyback where the label originally was but that's not helping me
    any. Thanks for helping out.
  4. BWL

    BWL Guest

    You need to get the board number off the heat sink on the board; will look
    something like APW0XX-X00X...
  5. James Sweet

    James Sweet Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day