Connect with us

philips 32d7 pincushion problem

Discussion in 'General Electronics' started by brian, Sep 15, 2003.

Scroll to continue with content
  1. brian

    brian Guest

    set had bad flyback..i had to replace that, t-chip,several smd,s to
    getset to run. now pincushion is only thing left but tried phillips
    suggestions replacing parts off pin 5 of flyback even when thry check
    good. no success.any ideas? thankyou in advance..i do have schematic
    on cd but is vague on this area.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day