Connect with us

phase voltage

Discussion in 'Electrical Engineering' started by [email protected], Aug 17, 2013.

Scroll to continue with content
  1. Guest

    If the following equation gives the phase voltage for a PMAC when the phase current (Iph) is in phase with the back emf (Eph)

    Vph = (Eph + Rs*Iph) + j*2*pi*frequency in hertz*Ls*Iph

    how would equation change when the Iph is 180 degrees out of phase with the back emf?
     
  2. Don Kelly

    Don Kelly Guest

    replace Iph by -Iph or + by -
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-