Connect with us


Discussion in 'General Electronics Discussion' started by Jasmeet Kaur, Jul 8, 2011.

Scroll to continue with content
  1. Jasmeet Kaur

    Jasmeet Kaur

    Apr 24, 2011
    Hello all
    We are working on a PLL circuit, using TRF3750, FREQUENCY SYNTHESIZER.
    We have tried with the Supply voltage: 3.3 V (and VCP=4.3v).
    We are sending serial data through docklight to the data pin (pin 12) of the IC, and then enable the LE pin for an instant, and remove it. According to the datasheet, the data should be loaded onto the selected latch from the shift register. We are first programming the function latch with r divider and then the r-counter. But we are unable to get the desired output at the MUXOUT pin (pin 14).
    Can anybody guide us about the programming of the TRF3750?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day