Maker Pro
Maker Pro

pen plotter driver for protel 99SE

Hi, I want to plot layout from Protel 99 SE directly on film, with my
HP7475A.
Windows drivers arre not good because they are clogging pen very
quickly (their output is quite chaotic with many penups and downs which
produces un-acceptable results). Could anyone tell me where to find
such pen plotter driver for w2000?..
Thanks in advance,
Bojan
 
Hi, I want to plot layout from Protel 99 SE directly on film, with my
HP7475A.
Windows drivers arre not good because they are clogging pen very
quickly (their output is quite chaotic with many penups and downs which
produces un-acceptable results). Could anyone tell me where to find
such pen plotter driver for w2000?..
Thanks in advance,
Bojan

Ask Percilla at Riverside Blueprint In California USA. She is very
helpful and knowledgable about the print media's. Area Code 951
 
Thank you for this input..
Can I contact her by email? I am living in Australia so email would
have been a more convenient way for me..
Thank you again,
Bojan
 
A

Anton Erasmus

Jan 1, 1970
0
Hi, I want to plot layout from Protel 99 SE directly on film, with my
HP7475A.
Windows drivers arre not good because they are clogging pen very
quickly (their output is quite chaotic with many penups and downs which
produces un-acceptable results). Could anyone tell me where to find
such pen plotter driver for w2000?..
Thanks in advance,
Bojan

You might be better off in searching for software that can drive a
plotter from the gerber files.
http://www.digitalnemesis.com/info/software/gerberplot/
Is one I found using google.

Regards
Anton Erasmus
 
D

Dr. Anton T. Squeegee

Jan 1, 1970
0
[email protected] (known to some as [email protected])
scribed...
Hi, I want to plot layout from Protel 99 SE directly on film, with my
HP7475A.

<snippety>

It's not so much getting a driver for Protel, specifically, as it
is getting Windows drivers for pen plotters.

Suggest trying this: http://www.winline.com

For about USD $200, you get a very comprehensive set of Windows
plotter drivers that will definitely handle your 7475A (and most other
plotters made), and that will install very nicely on Win2000.

Happy hunting.
 
Top