Connect with us

Peculiar Ground Problem

Discussion in 'Electronic Design' started by avbhki, Jul 31, 2007.

Scroll to continue with content
  1. avbhki

    avbhki Guest

    Hi

    I have a DSP Board which does some audio post synthesis interfaced
    though I2S (input and output). When I use pass-through or bypass, I
    can head the audio at the output stage. When I remove bypass and
    pass it though synthesis stage, I can see audio signals on the output
    (after processing) but I am unable to hear audio. I can hear the
    audio when I provide a kind of antenna/ground through body on some
    places on board (Supply, GND, connectors, etc). Since DSP board has
    only digital gnd, I am connected to the power supply and ground of
    output stage only.

    Thanks
    Avinash
     
  2. What frequency is it sampled at? Is there a low pass filter on the
    output?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-