Connect with us

PECL twisted pair question

Discussion in 'General Electronics Discussion' started by micsa, Aug 16, 2010.

Scroll to continue with content
  1. micsa


    Aug 16, 2010
    I have to communicate with an existing device, which uses some +5V PECL interfaces over a 150 Ohm twisted pair on 125MHz (the cable is < 10m, 30feet).
    The device is transformer-coupled and contains a transmit filter + equalizer.

    I've thought I could use TB5T1 for interfacing my FPGA with the cable and the device with direct coupling at my side (the transformer remains at the other side as I can't modify the device), for TX and RX too.

    I'm not too experienced with analog thing, please share your thoughts about this construction.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day