Connect with us

PCB Shielding - Fence/Lid Suppliers

Discussion in 'Electronic Design' started by davec, Feb 8, 2007.

  1. davec

    davec Guest

    I am designing a high speed digital board and would like to shield my
    circuit with a fence and a lid. Does anyone have a supplier
    recommendation?
     
  2. http://www.perancea.com/prod-metal01.htm
    i think that farnell stock them


    martin
     
  3. http://www.perancea.com/prod-metal.htm shows more options


    martin
     
  4. Eeyore

    Eeyore Guest

    It's far more cost effective to design the board right so that it doesn't need
    lots of shielding.

    Graham
     
  5. The OP seems to work for sound devices.

    Some of the sound devices stuff is rather compact, and I would
    actually assume that I was going to need shielding in the first place,
    but then I would assume that SD would know a source of shielding
    anyway, so it might be a home office job


    martin
     
  6. http://www.lairdtech.com

    They have lots of different sized fences and lids. I use the surface-
    mount styles in some products.

    Frank
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-