Connect with us

PCB fab house that can do large boards

Discussion in 'Electronic Design' started by Kevin C, Apr 3, 2007.

Scroll to continue with content
  1. Kevin C

    Kevin C Guest

    I am having some trouble locating a PCB fabricator that is capable of
    fabricating the size board that I need. I need 28" x 25" board. Do any
    of you know of any reputable fab houses that can do this?

  2. Joerg

    Joerg Guest

    It's in Europe and they did a huge backplane and many large boards for
    us, not cheap but top notch in quality:

    It's been >10 years. IIRC their English was ok (but I also speak German).
  3. Robert

    Robert Guest

    I'll ask tomorrow when I'm at work.

  4. Ian

    Ian Guest

    I'm pretty sure Multek can do that size
    They have plants in Germany and China.

  5. Robert

    Robert Guest

    Checked with a PCB list I'm on at work and got two recommendations.

    Try Titan Circuits. Ask for Maria. 510-824-1222
    Tell her I sent you.

    Flashline Electronics - Tom Hanighen, good prices - great service.

  6. Ben Jackson

    Ben Jackson Guest

    Even if you get the PCB made, you will probably have trouble getting
    it stuffed. We had a board at work that was 16" square with a protrusion
    to bring a port flush with the sheetmetal. The extra expense of building
    it led to a redesign to remove the protrusion and move the sheet metal.

    Unless you're making a kit. ;-)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day