Connect with us

PCB Design

Discussion in 'Electronic Design' started by termin, Apr 6, 2007.

Scroll to continue with content
  1. termin

    termin Guest

    Hi I am designing a control system PCB and i have a problem i don't
    know how to indicate vias in the PCB design i am using the free
    express PCB software ..
     
  2. Ken Fowler

    Ken Fowler Guest

    I think you just need to insert a corner in the trace where you want the via and then select the
    trace on either side which you want to move to the other plane and toggle the level from red to
    green or green to red. The via will be inserted and the trace will change colors. I just completed
    a PCB design using Express with many vias. Boards are in the queue at their fab.

    Ken Fowler
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-