Connect with us

PCB Connectors

Discussion in 'General Electronics Discussion' started by Mr Ed, Mar 26, 2018.

Scroll to continue with content
  1. Mr Ed

    Mr Ed

    Oct 6, 2017
    I have a pcb circuit which has some holes to connect wires from a battery and output wires. What are my options for some sort of pcb connectors which will enable me to easily connect to a battery and take off the output?
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    There are multiple options from pin headers to terminal blocks.
  3. AnalogKid


    Jun 10, 2015
    Photo of board?
    Accurate dimension of hole spacing?

  4. Mr Ed

    Mr Ed

    Oct 6, 2017
    The photos are not very good (cheap phone and never use the camera). However you will notice there are 2 input holes (GND- and VCC+) and and 8 output holes. The input holes are 3mm and output holes 2mm.

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day