Connect with us

PCB building

Discussion in 'PCB Layout, Design and Manufacture' started by HellasTechn, Apr 24, 2015.

Scroll to continue with content
  1. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Dear friends,

    From now on i would like to dedicate this topic to demonstrate The PCB's i have made.

    Enjoy !
     
    Last edited by a moderator: Oct 11, 2016
  2. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    IMG20150430_001.jpg IMG20150430_002.jpg IMG20150430_003.jpg IMG20150430_004.jpg IMG20150430_005.jpg IMG20150430_006.jpg Here are Pictures of my latest job.

    Tommorow i am going to make a new PCB to demonstrate you what i can make in much more detail.

    The board you see here has not been perforated or coated.

    The white stripe is where my last name is printed on the board.
     
    Last edited: May 13, 2015
    feraol and chopnhack like this.
  3. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    IMG20150508_001.jpg IMG20150508_002.jpg IMG20150508_003.jpg IMG20150508_004.jpg IMG20150508_005.jpg IMG20150508_006.jpg IMG20150508_007.jpg IMG20150508_008.jpg IMG20150508_011.jpg 004.jpg This is an other sample of my work.

    the white box is where my first and last name are on the board.

    Thank you very much.
     
    Last edited: May 13, 2015
  4. chopnhack

    chopnhack

    1,573
    354
    Apr 28, 2014
    Those look pretty sharp Constantine! Good work :)
     
  5. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
  6. huttojb

    huttojb

    52
    8
    May 3, 2015
    HellasTechn

    Where are you based, I might be interested in having some PCB developed. I have a light box and that but haven't done it for a long time.

    Jason
     
  7. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Greetings,

    I live in Greece.

    I see you live in the U.K. is that correct ?
    If yes and in case you decide to order PCB then you should know that shipping to the U.K. is easy and should take no more than 7 to 10 days also note that i always ship packages registered so i will provide you with tracking number.

    Please feel free to ask anything you need.

    Thank you for your interest in my work.
     
    Last edited: Jul 26, 2015
  8. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    PCB top side.
     

    Attached Files:

  9. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Coming up next : PCB with SMD components and Solder Mask.

    I will delay that a bit because i will be away for a week or so.
     
    Last edited: Oct 3, 2015
  10. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    This is a sample of my work involving SMT components and Solder Mask.

    The PCB's dimensions are as follows.

    PCB: 70mm X 100mm (2.75 inch X 3.93 inch)

    Trace width: 0.51mm (0,020 inch)

    Clearance around traces and pads: 0.71mm (0.028 inch)
     

    Attached Files:

    • 1.jpg
      1.jpg
      File size:
      157.5 KB
      Views:
      234
    • 2.jpg
      2.jpg
      File size:
      147.1 KB
      Views:
      253
    • 3.jpg
      3.jpg
      File size:
      152.9 KB
      Views:
      222
    • 4.jpg
      4.jpg
      File size:
      159 KB
      Views:
      232
    • 6.jpg
      6.jpg
      File size:
      163.3 KB
      Views:
      225
    • 7.jpg
      7.jpg
      File size:
      163.5 KB
      Views:
      242
    Last edited: Oct 20, 2015
    antonio_liu likes this.
  11. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    So yes i can also apply Solder Mask if you want to.

    Thank you.
     
    Last edited: Oct 22, 2015
  12. chopnhack

    chopnhack

    1,573
    354
    Apr 28, 2014
    Looks good Constantine!! I like the flag ;-)
     
  13. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    This board here is etched and sanded with extra fine sandpaper as part of soldermask preparation.

    Traces are 0.51mm wide and clearance around traces and pads is 0.71mm.

    Board dimensions are 70mm X 40mm.
     

    Attached Files:

    Last edited: Oct 31, 2015
  14. chopnhack

    chopnhack

    1,573
    354
    Apr 28, 2014
    Good technique Constantine!!!
    20 thou trace width by hand is very, very good! Kudos. Especially when you have a hole through the trace, that is an easy area for over etching. This is a very clean board, bravo.
     
  15. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Thanks John. I can do less (0,012 inch) (0,30mm) Next boards will be like that.
     
  16. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Here is the above PCB with solder mask.
     

    Attached Files:

  17. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Here traces are 0.38mm wide (0.015 inch) and clearance around traces and pads is 0.50mm (0,020 inch). Letters are of same size.
     

    Attached Files:

    Last edited: Nov 15, 2015
  18. chopnhack

    chopnhack

    1,573
    354
    Apr 28, 2014
    Very nice Constantine, clean down to .015!
    I see you are converting to useful currency ;-)
     
    davenn likes this.
  19. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    Well i beleave the quarter is the coin that most people have held in their hand at least once in their lifetime so that makes it easyer to compare size. About usefullness well currency in general is as valuable as we say it is right?

    "i got your joke though":)
     
    Last edited: Nov 18, 2015
  20. HellasTechn

    HellasTechn

    1,556
    215
    Apr 14, 2013
    This board was ordered by Sadlercomfort which i thank.
     

    Attached Files:

    Sadlercomfort likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-