Connect with us

Pcad version incompatibility?

Discussion in 'CAD' started by Noway2, Jul 23, 2008.

Scroll to continue with content
  1. Noway2

    Noway2 Guest

    Here is a question for all the pcad users out there. Now that that
    Altium has officially burried the product along with the knowledge
    base, it looks like were on our own.

    Recently we made changes to a PCB using Pcad 2002. When the board is
    viewed with the viewer tool (2006 edition) which is basically a
    watered down edition of PCB, several nets show up as unmade
    connections with the little blue lines showing. Attempting to
    "reconnect nets" does not solve the problem. Clearly this is another
    one of those bugs associated with pcad's finicky nature of traces and
    exact connection points.

    The concern is that there are some connection errors, identified by
    the viewer and aren't picked up by a DRC in the 2002 version. While
    unlikely, we feel it is prudent to spend some effort to discern the
    real cause of the problem.

    Is anybody aware of any compatibility issues between the 2002 and 2006
    versions, especially with regards to the PCB files and the netlist
    connections?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-