Maker Pro
Maker Pro

PC Board Kits

J

Jim Douglas

Jan 1, 1970
0
Any recommendations for kits, and were to get them for making PC boards
using the resist pen method? I would make 1-3 boards every couple of months
and they would not be all theat complicated.

Thanks!

JimD
 
D

Dmitri

Jan 1, 1970
0
Jim Douglas wrote:

Any recommendations for kits, and were to get them for making PC boards
using the resist pen method? I would make 1-3 boards every couple of
months
and they would not be all theat complicated.

JimD

Radio Shack's P/N 276-1576 should do. The board themselves are very thin
in this kit (I think, 0.008), so you may want to buy thicker boards,
depending on your application. The resist pen is included, too. Well, OK,
it's just a Sharpie, but it's there ;-)

--
Dmitri Abaimov, RCDD
http://www.cabling-design.com
Cabling Forum, color codes, pinouts and other useful resources for
premises cabling users and pros
http://www.cabling-design.com/homecabling
Residential Cabling Guide
-------------------------------------






##-----------------------------------------------##
Article posted with Cabling-Design.com Newsgroup Archive
http://www.cabling-design.com/forums
no-spam read and post WWW interface to your favorite newsgroup -
sci.electronics.basics,sci.electronics.design,sci.electronics.misc - messages and counting!
##-----------------------------------------------##
 
B

Bob Masta

Jan 1, 1970
0
Any recommendations for kits, and were to get them for making PC boards
using the resist pen method? I would make 1-3 boards every couple of months
and they would not be all theat complicated.

Complete instructions plus lots of hints and tips at:
www.daqarta.com/lptxh.htm

Hope this helps!


Bob Masta
dqatechATdaqartaDOTcom

D A Q A R T A
Data AcQuisition And Real-Time Analysis
www.daqarta.com
 
R

Rob Storey

Jan 1, 1970
0
Top