Connect with us

Paralleling Three Full Wave Rectifier Bridges

Discussion in 'Electronic Design' started by Anand P. Paralkar, Dec 27, 2013.

Scroll to continue with content
  1. Fred Abse

    Fred Abse Guest

    For John's approximately 100 amp supply, 120 milliohms would be a
    reasonable guess. 5% regulation is what I'd want on an industrial supply.
    That gives about 344 amps peak diode current.
  2. Guest

    On Sunday, December 29, 2013 1:54:05 PM UTC-5, John S wrote:
    Like I told your other fake alias: drop dead.
  3. John S

    John S Guest

    You go first.
  4. Fred Abse

    Fred Abse Guest

    Since you seem disinclined to do that, I'll ask this:

    As you rotate the variac, moving the wiper from 100% downwards, does the
    phase of the output change, or stay in phase with the input?

    Try it.

    That should tell you something.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day