Connect with us

Paradox MG5050 - Open Zones

Discussion in 'Troubleshooting and Repair' started by Leon Oosthuizen, Apr 3, 2018.

Scroll to continue with content
  1. Leon Oosthuizen

    Leon Oosthuizen

    2
    0
    Apr 3, 2018
    Hi, my alarm system as mentioned above, suddenly has a fault and I cant figure out what has happened. All the wired Zones show up as open, meaning that they cannot be alarmed. The wireless PIR's are all fine. I thought it might be a battery problem but I have changed the batteries but still the zones are open. Has anyone got a solution to this?

    Thanks

    Leon
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,419
    2,790
    Jan 21, 2010
    Had somebody cut the wires?
     
  3. Leon Oosthuizen

    Leon Oosthuizen

    2
    0
    Apr 3, 2018
    No, if I power down the system and then restart the zones are closed and then one by one they open.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-