Connect with us

Panasonic VCR SMPS VEPS1017

Discussion in 'Electronic Repair' started by whacker, Mar 30, 2007.

Scroll to continue with content
  1. whacker

    whacker Guest

    Hello
    I've found some shorted diodes on the low voltage side and need some
    help identifying them . In particular D5 - D8, I have SAMS schematic
    and it doesn't identify those parts..
    Thanks
    WHacker
     
  2. Meat Plow

    Meat Plow Guest

    Why not take a guess knowing the voltage/current requirements? Seems 4
    diodes in that grid number sequence would indicate a bridge. Possibly 2
    [email protected] 500vdc generic would do the job?



    --
    #1 Offishul Ruiner of Usenet, March 2007
    #1 Usenet Asshole, March 2007
    #1 Bartlo Pset, March 13-24 2007
    #10 Most hated Usenetizen of all time
    Pierre Salinger Memorial Hook, Line & Sinker, June 2004
    COOSN-266-06-25794
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-