Connect with us

Panasonic VCR F05 Error

Discussion in 'Electronic Repair' started by [email protected], Nov 23, 2006.

Scroll to continue with content
  1. Guest

    I have a one time top of the range Panasonic NV-HD670 VCR that won't eject a tape and just sits
    there displaying an F05 error code.

    Any ideas as to the cause and whether it is worth repairing?

  2. b

    b Guest

    ha escrito:
    could be a belt or something more serious.
    databse says also: no menus, test sig & "F05" displayed when tape
    inserted Q1002 2SD1996STTA 5v reg in psu

    I'd start by checking the belt
    In any case, top end vcrs are worth hanging on or having repaired if
    they've not had lots of wear, to as well built ones are impossible to
    find nowadays.
  3. N Cook

    N Cook Guest

    NV HD600 and 610 manual shows F05 to be tape not wound back into cassette
  4. b

    b Guest

    b ha escrito:
    sorry, a typo: I meant F05 as in original post
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day