Connect with us

Panasonic vcr error F05

Discussion in 'Electronic Repair' started by bigtom, Mar 16, 2005.

Scroll to continue with content
  1. bigtom

    bigtom Guest

    Panasonic NV HD670A vcr.

    The tape wont come out when i press eject.
    It sounds like its trying to eject it, but then the vcr shuts down
    with "f05" displayed.
     
  2. Guest

    Suspect split collar on the loading motor drive shaft (inside the worn
    gear). Could also have cracked slide lever assy.

    F05 is a mech fault

    entire mech will need to come out as the load motor is underneath the
    mech (no bottom access through cabinet) - the trick is that there is a
    screw which will now be under your stuck tape which has to be removed.

    HINT- The tape can be extracted without damage.

    The job is quite fiddly and there are other wear items to consider
    while you have it apart.

    Cheers,
    Sam T
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-