Connect with us

Panasonic TX-29AL10P Service mode - defaults

Reply to Thread

Discussion in 'Electronic Repair' started by Wizipok, Aug 19, 2003.

Scroll to continue with content
  1. Aug 19, 2003 #1
    Wizipok

    Wizipok Guest

    Hello
    My Panasonic television geometry was repaired in autorized service,
    but finally the geometry after repair was worse then before.
    I decide to adjust this geometry myself.
    What is the adjustment sequence for the service mode for Panasoni
    TX-29AL10P television.
    Exists some RESET TO DEFAULT function in service menu, to reset
    adjusted data to default data from manufacture?
    Can somebody help me with default data for this TV ?
    Thanks WiziPok
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Panasonic TX-32PK25D Service Mode

  2. service mode on Panasonic tx-32pk25

  3. Panasonic TX-28 W1 Service Mode

  4. Service mode on Panasonic TX-28SK!C

  5. Panasonic Tau CT27SX10B Service Menu defaults?

  6. Panasonic 50LC13 I2C service mode

  7. Panasonic PV-27DF64 "service mode"?

  8. Panasonic PV-DF273 service mode

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-