Maker Pro
Maker Pro

Panasonic TV ct-32g11

patrickg450

Nov 3, 2009
1
Joined
Nov 3, 2009
Messages
1
Okie dokie: darn TV bit the dust again. About 7 yras ago I had to repair all the cold solder joints as the TV kept turning off and on. This time it never came on, so I looked and and all I can hear is the click of the relay. I went ahead and replaced the horizonal output transistor (BU2505/NTE2353), sadly it did not fix it.

Does anyone have access to a good schematic? Or any good ideas on what it could be? Itr has been a while since I have done PCB repair but I did get it soldered in quite nicely!!!


Thanks guys
 
Top