Connect with us

Panasonic MX-6 chassis

Discussion in 'Electronic Repair' started by Peter Aberrant, May 6, 2004.

Scroll to continue with content
  1. Hi does someone know how to get into the service mode with the Panasonic
    MX-6 chassis

    A EEPROM was replaced and the width is right in, so we need to set it.

    Thanks From Peter
     
  2. OK stop looking
    I found out


    Hi does someone know how to get into the service mode with the Panasonic
    MX-6 chassis

    A EEPROM was replaced and the width is right in, so we need to set it.

    Thanks From Peter
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-