Connect with us

Panasonic Microwave

Discussion in 'Electronic Repair' started by Russ_Verdon, Jul 23, 2006.

Scroll to continue with content
  1. Russ_Verdon

    Russ_Verdon Guest

    I have two Panasonic Dimension 4 microwaves with the same problem. When
    plugged in, the motor running the belt driving the air circulation fan for
    the convection oven, turns on and continues to run.
    I removed and checked the relay controlling this motor and it is ok. The
    relay coil goes into a BA12004.

    Is this a known problem with these ovens?

    Regards
    Russell
     
  2. lsmartino

    lsmartino Guest

    Russ_Verdon ha escrito:

    Bad BA12004?

    This is the datasheet for the BA12004:

    http://www.nteinc.com/specs/2000to2099/NTE2011.html

    If the relay coil is always energized, it will make the fan run always.
    You should investigate why the relay coil is always on.
     
  3. Franc Zabkar

    Franc Zabkar Guest

  4. Russ_Verdon

    Russ_Verdon Guest

    Thanks for the link and sub info
    Will replace the IC and see what transpires.

    Russell
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-