Connect with us

Panasonic F60 error

Discussion in 'Electronic Repair' started by Ken G., Sep 20, 2007.

Scroll to continue with content
  1. Ken G.

    Ken G. Guest

    Dont have the unit here for a model # . Its about 2 years old still in
    its box and looking new .

    DVD recorder and VCR unit . When its plugged in a row of 00000 scan in
    a row a few times then F60 . No functions respond . When a tape is
    pushed into the vcr it takes it in kind of ``jerky`` does not load tape
    Ejects `jerky`` also
    I have removed both decks and still get the same F60 .
    The power supply has none of those regulator packs . This unit has no
    amplifiers either .
     
  2. Ken G.

    Ken G. Guest

    My posts are getting LOST
     
  3. Sjouke Burry

    Sjouke Burry Guest

    Well with this low content thats no problem :)
     
  4. Meat Plow

    Meat Plow Guest

    Maybe you should too.
     
  5. Ken G.

    Ken G. Guest

    Here it is again incase the educated missed it .


    Panasonic F60 error

    Dont have the unit here for a model # . Its about 2 years old still in
    its box and looking new .
    DVD recorder and VCR unit . When its plugged in a row of 00000 scan in a
    row a few times then F60 . No functions respond . When a tape is pushed
    into the vcr it takes it in kind of ``jerky`` does not load tape
      Ejects `jerky`` also
    I have removed both decks and still get the same F60 . The power supply
    has none of those regulator packs . This unit has no amplifiers either .

    Sence the first post on this i looked in the manual and it does not
    cover F60 . I took the power suppy out and tested the capacitors and all
    good , no shorted zeners . This unit has no use on it . I`d like to see
    it work
     
  6. Ken G.

    Ken G. Guest

    meat plow said ,, maybe you should too,,

    Now can you honestly find anything in that statement that helped anyone
    in any way ?
    I wish you well .
     
  7. Meat Plow

    Meat Plow Guest

    It will help people who don't want to see your repetitive posts
    and attention seeking ############# Panasonic F60 error ###### HELP
    headers.
     
  8. Meat Plow

    Meat Plow Guest

    How about getting a model number like you've been asked and we'll take it
    from there.
     
  9. Ken G.

    Ken G. Guest

    Meat plow
    i would rather not receive help from you . After your responces i dont
    trust you or believe you . I am in search of educated technicians
    however i wish you well .

    Thanks all who may have looked at this
     
  10. Meat Plow

    Meat Plow Guest

    I couldn't care less who you trust or believe or even if you live
    or die. I told you to get a model number just like others did. If you
    can't do that then kindly **** off and come back only when you learn a
    little Usenet etiquette and the art of cooperation.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-