Connect with us

Panasonic DVD RV31 skipping problem

Discussion in 'Electronic Repair' started by Martin Whybrow, Jan 9, 2009.

Scroll to continue with content
  1. I'm attempting to repair a Panasonic DVD RV31 dvd player that has a skipping
    problem. I've done the basics, cleaned the lens and cleaned / re-lubricated
    the rails but it hasn't helped. I noticed that there is a lot of noise when
    the sled moves, the noise appears to come from the area around the pinion
    that engages the sled rack, so I don't suspect the motor as that's much
    further towards the front of the deck.
    I can't figure out how to remove the anti-backlash gear that has the pinion
    on the lower face to examine it so I'm not sure if it's damaged; I have
    tried lubricating the gear train but it didn't help.
    Any suggestions (other than scrapping it).
    Martin
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-