Connect with us

Panasonic CT32E33G EP407 chassis

Discussion in 'Electronic Repair' started by jay, Oct 29, 2005.

Scroll to continue with content
  1. jay

    jay Guest

    Hi All,

    Still struggling with this TV. Had a shorted STRW5634, after replacing
    the IC all the voltages read about 1/2 their actual value.

    Eg 12 V standby reads approc 6 volts.

    The 3.3 V to micro is good and hitting the power switch the TV tries
    starting up but then shuts down again. I verified that the optoisolator
    was good but replaced it anyway that did not help.

    All electrolytics show up good on an ESR meter and the diodes around
    the flyback read OK.

    Has anyone run into a similar problem with panasonics?

    Thanks
    Jay
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-