Connect with us

P I metal detector coils

Discussion in 'General Electronics Discussion' started by hargrovebrian, Feb 25, 2010.

Scroll to continue with content
  1. hargrovebrian

    hargrovebrian

    1
    0
    Feb 25, 2010
    Hi

    I am trying to build a 16 ft coax cable coil for a F1A4 metal/mine pulse induction detector.

    I was told by the company that this is simular to a commersal sd2100 by minelab.
    but that is as far as they will go on information about coil design.

    I have seen detector coils that are towed behind cars or orv's.

    Thier are company's that sell Pulse Induction detectors that use large coils (26 ft)(4 ft square).

    Is it possable to build a large coil for the pulse induction detector?

    How large?

    Thank You Brian
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-