Connect with us

OZ960 ccfl controller

Discussion in 'General Electronics Discussion' started by jonjlg, Jul 23, 2010.

Scroll to continue with content
  1. jonjlg


    Jul 23, 2010
    We are having trouble controlling the full range of the tubes. Is it a limitation that if it goes below a threshold, in our experience it seems to be 0.6ms pulse within a 4.6ms period, the backlight cuts off for protection. Any ideas how we can achieve the range of 0-100% ccfl output? We have tried adjusting the feeedback resistor, R9, with negligible success.
  2. jonjlg


    Jul 23, 2010
    Hi guys any ideas?
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    I'm pretty sure that you can't get anything like 0 to 100% with CCFL.

    I could take light meter readings of my laptop screen to give you some idea of the range they get...

    It looks like you'd be lucky to get 10:1 range of brightness
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day