Connect with us

Oven broiler igniter

Discussion in 'Troubleshooting and Repair' started by jmmooney, Oct 9, 2013.

  1. jmmooney

    jmmooney

    1
    0
    Oct 9, 2013
    I am trying to repair a DCS oven broiler igniter and I cannot figure out how to disconnect the old broiler igniter connector?

    :confused:
     
  2. davenn

    davenn Moderator

    13,293
    1,757
    Sep 5, 2009
    maybe some sharp and well lit photos of the unit may help us to help you

    Dave
     
  3. shrtrnd

    shrtrnd

    3,670
    453
    Jan 15, 2010
    We do need a picture if you can supply it.
    It's possible the ignitier 'connector' isn't a connector at all.
    Most of the igniters I've seen are molded directly to the wiring. You replace the
    igniter assembly with the wires.
    We'd need a picture to identify if you do have an actual connector there.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-