Connect with us

Output Impedance

Discussion in 'General Electronics Discussion' started by rinchan6, Oct 27, 2014.

  1. rinchan6

    rinchan6

    42
    1
    Aug 27, 2013
    Hi guys, Im trying to achieve an output impedance of 4 ohms using 3 speakers, a woofer, midrange and tweeter. I would like to connect the woofer to a subwoofer filter so I cant series it with any other speaker. My problem is I cant figure out how am i going to wire them :/ this might be a simple one but I cant really figure it out.
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    9,131
    1,842
    Nov 17, 2011
    When using a crossover network, you don't put the different channels in series. You put them effectively in parallel. Each channel (low, mid, high) presents it's impedance to the driving amplifier only in the respective frequency band.

    Here is some stuff to read.
     
    Gryd3 likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-